Sloky Torque Tools: Get CNC Tool Changes Right Every Time
CNC tool changes are part of the everyday routine in most workshops.
Insert screws, toolholder screws, cutter changes, fixtures and small fasteners all need to be tightened correctly. Most experienced operators know what they’re doing, but when different people are setting tools throughout the day, “tight enough” can vary from person to person.
That’s where Sloky torque tools are useful.
Sloky helps make tool changes more repeatable by using preset torque adapters that give a clear click when the set torque is reached.
Why correct torque matters
On CNC tooling, small screws can do an important job.
If a screw is under-tightened, it may allow movement or vibration during machining. That can affect cutting performance, tool life and finish.
If a screw is over-tightened, it can damage the screw, insert or holder. In some cases, it can turn a simple insert change into a much bigger problem.
The aim is not to make a simple job complicated. It is to make a common job more consistent.
Right torque. Clear click. Less guesswork.
Sloky preset torque tools are designed to help operators apply the correct torque more consistently.
Instead of relying purely on feel, the torque adapter gives a clear click when the preset torque value is reached. This helps reduce guesswork during everyday CNC tool changes and supports more repeatable setups across the workshop.
This can be useful for:
- Insert screws
- Toolholder screws
- Milling cutters
- Turning tools
- Fixtures and workholding
- Precision assembly
- General small fastener applications
The torque is in the adapter
One of the key benefits of the Sloky system is that the torque is built into the adapter.
That means the adapter controls the preset torque value, not the handle.
This gives the system more flexibility. Depending on the setup, you can use the correct Sloky torque adapter with a suitable handle and standard 1/4" hex bits.
In simple terms:
Choose the torque adapter. Use the handle and bit setup that suits the job.
That makes Sloky a practical option for workshops using different screw types, torque values and applications.
Colour-coded torque adapters
Sloky torque adapters are colour-coded to make torque selection easier.
This helps operators quickly identify the correct adapter for the job, especially where different screws and torque values are used across a workshop.
Common CNC screw and bit types include:
- TX
- IP
- HX
The colour-coded system helps reduce the need to memorise every torque value and makes it easier to keep tool changes consistent.
Useful for busy workshops
In a busy workshop, tool changes happen quickly.
Different operators may work on the same machines. Inserts may be changed throughout the day. Fixtures may be adjusted repeatedly. Small screws and fasteners are tightened again and again.
Sloky helps bring more consistency to that everyday process.
It is a simple idea:
Correct torque, clear click, repeatable tightening.
Sloky torque tools from Advanced Carbide Tooling
Advanced Carbide Tooling supplies Sloky torque tools, adapters, handles, bits and kits for CNC tooling and workshop applications.
Whether you know the exact torque adapter you need or you would like help choosing the right setup, we can help.
Send us your screw type, toolholder reference, current setup or application and we’ll point you in the right direction.
